Phone:819 395-4380Fax: 819 395-5516Toll Free:1 888 404-4380E-mail:info@shoule.com
Fabrication S. Houle Fabrication S. Houle Fabrication S. Houle Fabrication S. Houle

options available

Fabrication S. Houle

GP-10 Grapple

Fabrication S. Houle
For installation on BB, B and HB model rock buckets. See GRAPPLES section for more information
Fabrication S. Houle

SGP-10 Grapple

Fabrication S. Houle

For installation on SHB model rock buckets. See GRAPPLES section for more information

Models, specifications and attachments available

Models and Specifications

 MODELWIDTHWEIGHTNUMBER OF TINES
Tractors 22 to 45 kW and small skid steer loaders
BB-4120 cm218 kg17
BB-5160 cm272 kg21
BB-6178 cm320 kg25
BB-7210 cm354 kg29
 MODELWIDTHWEIGHTNUMBER OF TINES
Tractors 22 to 45 kW and small skid steer loaders
BB-447 in.480 lb17
BB-562 in.600 lb21
BB-670 in.705 lb25
BB-782 in.780 lb29

 MODELWIDTHWEIGHTNUMBER OF TINES
Tractors 45 to 75 kW, skid steer loaders and backhoes
B-5147 cm264 kg16
B-6178 cm345 kg19
B-7206 cm397 kg22
B-8234 cm450 kg25
 MODELWIDTHWEIGHTNUMBER OF TINES
Tractors 45 to 75 kW, skid steer loaders and backhoes
B-558 in.581 lb16
B-670 in.760 lb19
B-781 in.875 lb22
B-892 in.990 lb25

 MODELWIDTHWEIGHTNUMBER OF TINES
Tractors 63 to 150 kW
HB-5155 cm320 kg14
HB-6178 cm372 kg16
HB-7223 cm450 kg19
HB-8246 cm504 kg22
HB-9279 cm624 kg25
 MODELWIDTHWEIGHTNUMBER OF TINES
Tractors 85 to 200 HP
HB-561 in.705 lb14
HB-670 in.820 lb16
HB-788 in.990 lb19
HB-897 in.1,110 lb22
HB-9110 in.1,375 lb25

 DIMENSIONSWEIGHTTYPE OF MACHINERY
2 Hydraulic cylinders - 4 steel teeth
GP-10 modelAdaptable to S.Houle's B and HB series material buckets from 5 to 9 ft.625 lbTractors, skid steer loaders and telehandlers
SGP-10 modelAdaptable to S.Houle's SHB series material buckets700 lbIndustrial loaders, mini-excavators and telehandlers
 MODELWIDTHWEIGHTNUMBER OF TINES
Industrial loaders and large backhoes
SHB-8254 cm943 kg18
SHB-9285 cm1,002 kg20

A FINE POINT TECHNOLOGY!

On a rock bucket in operation, the most important mechanical stresses are on the end of the tips.

Compare the technology of the S Houle tines to the competition. We are the only ones to have conceived of a tip according to the real demands found in the field.

In effect, for our BB, B, HB et SHB buckets, we utilize steel tips made of chromolybdene steel with a high elasticity limit and a higher steel density, forged in a geometry that takes consideration of the repartition efforts exerted. They also integrate a unique flange design that keeps the rocks inside the bucket. In addition, the shape of the tips has been carefully studied to limit the jamming of rocks and dirt between the tips.

See the comparisons when tested under tension…

Fabrication S. HouleFabrication S. Houle

For a 1 ½” (0.38 cm) tine, the SHoule tip supports 273% of the vertical charge and 244% of the lateral charge in comparison to typical points used by the competition.

Designed
for
extreme use

Learn more about our methods

WE LIKE SHOULE’S MATERIAL BUCKETS FOR:

  • their tips made from forged steel, designed so they will not bend even under the most strenuous loads;
  • their ability to support maximum weight up to 3 times what standard models can offer;
  • their extremely robust structure.
Ask for information
MENU