|
|  |
- Its single blade eliminates fragments created by traditional two blade models.
- The blade’s “corner” design lets you anticipate the direction of the tree’s fall – usually to the right.
- Deeper cuts reduce the amount of cylinder strength needed.
- The blade moves from side to side, giving the operator better visibility.
- The single blade design reduces wear and tear by 50%, compared to standard double blade models.
- Concave jaws are more suited to the natural shape of the tree.
- Can cut trees at ground level, and can also rotate to cut branches.
- The jaws can also pick up and carry fallen trees and branches.
- Can cut a tree up to 15 inches in diameter in just a few seconds, depending on hydraulic pressure and output.
- Models designed for tractor loaders can be offset to the right, thus improving visibility.
- The fixed arm of the tree shear is modeled with teeth to provide a powerful grip on the tree being removed.
- Industrial 6 in. diam. x 17 in. stroke hydraulic cylinder.
- Lateral tilt hydraulic cylinder (3 in. diam. x 8 in. stroke) lets the cutting assembly rotate 110 degrees.
- Fits all commercial and agricultural loaders.
- Electromagnetic valve lets the tree shear perform two hydraulic functions with one command.
- The blade’s hydraulic cylinder is positioned to allow manoeuvres very close to ground level.
- The tree shear’s 3 inch joint axis enables it to perform wide angle rotations.
- All joints are greaseable, so as to extend life expectancy of your tree shear.
- The blade is made of T-1 steel, 3 times more durable than ordinary steel. The jaws and body of the tree shear are made of high tensile steel.
- Weight 1,275 lbs.
|
