|
|
|
|
|
|
 |
 |
|
 |
|
Tilt Offered in option, the tilt of the leveller is very useful along ditches. The option is available on the right-hand side, the left-hand side or both at the same time. |
 |
 |
Scarifier teeth Scarifier teeth option is very useful especially when the ground is hard. Teeth can be spaced out 12, 16 or 18 inches according to your needs. |
|
Cutting edge The SLN leveller is provided with lateral skid shoe. The cutting edges of the SLN leveller are tempered steel, much more resistant than standard steel, which will extend the lifetime of the blade. Lateral skid shoe are bolted to the blade which facilitate the change. |
 |
 |
Tandem wheels The wheels of the SLN leveller are tandem mounted to eliminate the swaying therefore offering a better stability. |
|
GPS or Laser post Optional a post which can receive either a GPS or Laser device is available. |
 |
 |
Light kit Light positioning system is offered as an option on our SLN models. Your security and that of others are important when going on the road. |
 |
|
Click on small pictures.
|
 |
|
Models | Capacity | Weight | HP Recommended |
Tires |
| SLN-16 | 320 ft³ | 10,925 lb / 4,955 kg | 300 HP and + | 16.5L x 16.1 | |
| SLN-18 | 360 ft³ | 11,450 lb / 5,195 kg | 300 HP and + | 16.5L x 16.1 | |
| SLN-20 | 401 ft³ | 12,375 lb / 5,615 kg | 300 HP and + | 16.5L x 16.1 | |
| If you would like a quote, please complete this form: Request a Quote |
|
In order to make constant product improvements, Fabrication S. Houle reserves the right to alter the products shown without prior notice. |
 |
