|
|
|
|
|
|
 |
 |
|
 |
|
Tilt Offered in option, the tilt of the leveller is very useful along ditches. The option is available on the right-hand side, the left-hand side or both at the same time. |
 |
 |
Scarifier teeth Scarifier teeth option is very useful especially when the ground is hard. Teeth can be spaced out 12, 16 or 18 inches according to your needs. |
|
Cutting edge The LN leveller is provided with lateral skid shoe. The cutting edges of the LN leveller are tempered steel, much more resistant than standard steel, which will extend the lifetime of the blade. Lateral skid shoe are bolted to the blade which facilitate the change. |
 |
 |
Tandem wheels The wheels of the LN leveller are tandem mounted to eliminate the swaying therefore offering a better stability. |
|
GPS or Laser post Optional a post which can receive either a GPS or Laser device is available. |
 |
 |
Light kit Light positioning system is offered as an option on our LN models. Your security and that of others are important when going on the road. |
 |
|
Models | Capacity | Weight | HP Recommended |
Tires |
| LN-14 | 127 ft³ | 5,580 lb / 2,531 kg | 100 to 225 HP | 12.5L / 15 | |
| LN-16 | 145 ft³ | 6,000 lb / 2,722 kg | 140 to 225 HP | 12.5L / 15 | |
| LN-18 | 163 ft³ | 6,910 lb / 3,134 kg | 180 to 225 HP | 31x13,5 - 15 TL | |
| If you would like a quote, please complete this form: Request a Quote |
|
In order to make constant product improvements, Fabrication S. Houle reserves the right to alter the products shown without prior notice. |
 |